The boiler tube is where the entire refrigeration process is driven, thus, this is the tube where the ARP Temperature Probe is installed. Sensor is near the flue tube so that it can pick up heat from the Also, the flue tube will cause a false reading if the The ARP temperature probe cannot be mounted on or near the flue tube. The flue tube is at the back of the boiler tube for most Norcold units As a rule of thumb, the flue tub is the front tube on most Dometic units Please keep track of how each section comes out for the re-installation process. If necessary, the insulation may be temporarily removed by pulling a section of insulation away. The insulation within the boiler housing is pushed to either side of the flue and boiler assembly to gain access to the boiler temperature probe install location. This next photo shows the heater access door removed and the insulation removed so one can see the tubes within the boiler housing. For installation, just reverse this process. Slide the lower hinge out of the boiler housing, and then allow the door to drop down so that the upper hinge disengages. Once the door can clear the heater element, push the door up - this will disengage the lower hinge. The lower hinge is seen to the lower right in this photo the upper hinge is not within view. The door can be bent back into place upon re-installation of the door. Otherwise, the sheet metal may be bent to clear the heater element. If the heater element can be twisted a little, it may need to be moved to allow the door to fully open. One can gently bend the tab so that the door will open from the tab side of the door. The tab identified in this photo holds the door shut. The boiler temperature probe install procedure is similar for all cooling units, the cooling units differ from manufacture to manufacture, see specific install pages for more details. This photo shows a typical boiler housing electric heater access door for either the Dometic or Norcold absorption refrigerator.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |